1.By default, Cisco Unity interacts with which directory file in Lotus Domino? 
A. Names.nsf
B. Directory.dir
C. Domain.nam
D. AdSchema.dat
Answer:A 
2.When installing Cisco Unity into a Lotus Domino messaging environment, one requirement is to install at least
one Cisco Unity server per Domino _____.
A. site 
B. domain
C. nsf group
D. routing group
Answer:B 
3.Which is a feature of Domino Unified Communications (DUC) Services?
A. Call Control
B. Directory Replication
C. Message Forwarding 
D. Message Waiting Indicators
Answer:D 
4.Domino Unified Communications (DUC) Services must be installed on which servers in a Cisco Unity/Lotus
Domino messaging environment?
A. all Cisco Unity servers in the domain
B. all Lotus Domino servers in the domain
C. only the Cisco Unity Partner Domino server
D. Lotus Domino servers hosting Cisco Unity subscribers
Answer:D 
5.The Unity Active Directory schema extension is run on which server?
TestInside    642-071
A. Cisco Unity server only
B. Windows 2000 Schema Master
C. Exchange 5.5 Raw Schema server
D. Windows 2000 Primary Domain Controller
Answer:B 
6.You are installing Cisco Unity in an Exchange 5.5/2000 mixed-mode messaging configuration. Which Exchange
server(s) acts as the Cisco Unity partner server?
A. Exchange 5.5 server only
B. Exchange 2000 server only
C. Cisco Unity uses the Microsoft ADC.
D. an Exchange 5.5 or Exchange 2000 server
Answer:B 
7.In which messaging configuration must the schema be extended for Cisco Unity?
A. Lotus Domino
B. Exchange 5.5
C. Exchange 2000/2003
D. Domino/Exchange mixed-mode 
Answer:C 
8.You have installed Microsoft Exchange 2000 on the Cisco Unity server. According to best practice, this
indicates Cisco Unity will be used in which type of configuration(s)? 
A. voice mail only
B. Unified Messaging only
C. voice mail only or Unified Messaging
D. Unified Messaging if Active Directory schema extension is run
Answer:A 
9.You are installing Cisco Unity with failover. Which database software do you install?
A. MSDE
TestInside    642-071
B. SQL 7
C. SQL 2000
D. depends on the number of ports
Answer:C 
10.In a Cisco Unity failover configuration, which component replicates the database between the primary and
secondary servers?
A. MSDE
B. SQL 2000
C. DB connector
D. directory replication connector
Answer:B 
11.A Disaster Recovery Tool (DiRT) backup can be restored to a _____. 
A. functioning Cisco Unity of the same software level
B. functioning Cisco Unity with an upgraded software level
C. Cisco Unity platform with only the operating system installed
D. Cisco Unity platform with the operating system and SQL installed
Answer:A 
12.Which Cisco Unity component does Veritas Backup Exec back up that the Disaster Recovery Tool (DiRT) does
not?
A. routing rules
B. SQL database
C. operating system 
D. off box messages
Answer:C 
13.You are setting up VLANs for integration with IP Telephony. Cisco Unity must reside on which VLAN for
enhanced security? 
A. Null VLAN
TestInside    642-071
B. Data VLAN
C. SMDI VLAN 
D. Voice VLAN
Answer:B 
14.The Cisco Security Agent (CSA) can be installed on to the Cisco Unity server to _____.
A. "harden" the server
B. force password changes for security
C. prevent forwarding of private messages
D. provide additional authentication for Unity Inbox users
Answer:A 
15.You have heard that Cisco Unity can react slowly to commands and the playing of messages after an antivirus
tool is installed on the Unity server. To prevent this from occurring, you _____.
A. confirm the antivirus tool is Microsoft Exchange aware
B. do NOT run a complete file I/O scan on the Unity server
C. do nothing as Cisco Unity will acclimate to the antivirus tool
D. confirm it is a McAfee antivirus tool, the only antivirus tools that are supported
Answer:B 
16.Your customer is concerned about security on their Cisco Unity Unified Messaging installation. Which two
steps can they take to improve security? (Choose two.) 
A. install antivirus software
B. perform a nightly backup
C. keep voice mail messages on box
D. install Cisco Unity's Security Agent software
E. isolate Cisco Unity behind a separate firewall
Answer:AD 
17.You are attempting to manage subscribers on other Cisco Unity servers. When you attempt to connect, you are
denied access. 
TestInside    642-071
What is the most probable cause for this? 
A. You can only use Terminal Services for this function.
B. You do not have permissions and must run the Grant Unity Access Utility.
C. You cannot manage Cisco Unity servers located outside your dialing domain.
D. The Cisco Unity server you are attempting to reach has the Cisco Unity Security Agent installed. 
Answer:B 
18.Some Cisco Unity Unified Messaging users complain that they cannot use the telephone for the recording and
playing of messages through their desktops. What is a possible cause for this? 
A. A firewall separates these users from Cisco Unity. 
B. These users are not licensed for Unified Messaging.
C. These users need to have their Exchange mailboxes modified to allow access.
D. The Unity server does not have a sufficient number of Unified Messaging licenses.
Answer:A 
19.Your customer has 1200 users. The users are spread evenly across three routing groups in one Exchange 2000
organization. Each routing group is in a different geographical location within a single phone system. 
They want you to configure a voice mail only solution with a plan to migrate to Unified Messaging. They must
have the ability to send an all employee message to one distribution list and have the Automated Attendant search
for all users by name, regardless of the location. 
Which configuration best meets the customer's requirements?
A. a new forest/domain with one Unity system in each new Exchange routing group
B. a new forest/domain with three Unity systems in each new Exchange routing group
C. a new forest/domain with one Unity system in the existing root Exchange routing groups
D. There is no Unity solution that fits this Exchange 2000 configuration.
Answer:A 
20.Your customer has 5,000 users in a single Exchange 2000 routing group. They request that you configure a
voice mail only solution. Without planning for the domain controllers and global catalog servers, what is the
minimum number of Exchange servers that you need just to locate the users?
A. 1
TestInside    642-071
B. 2
C. 3
D. 4
Answer:B 
21.Your customer requires you to provide a Unity solution that will offer voice mail only today and a planned
migration path to Unified Messaging in the next year. They have an existing Windows 2000 and Exchange 2000
configuration that supports their 12,000 users. At this time they do not allow the Windows 2000 Active Directory
schema to be modified. 
How can you best meet the customer's requirements?
A. install two Unity servers in the existing win2K domain and import the users 
B. install four Unity servers in the existing win2K domain and import the users 
C. create a separate forest/domain with new servers provisioned for the 12,000 users and use the same Exchange
alias naming convention
D. create a separate forest/domain with new servers provisioned for the 12,000 users and use a separate Exchange
alias naming convention so there are no overlapping GUID issues
Answer:C 
22.Your customer has 2,000 users in a single Exchange 2000 routing group. They request that you configure a
voice mail only solution. They plan to migrate to Unified Messaging very soon, so they want you to use the
existing Exchange servers. 
Following the supported configurations in the Cisco Unity Design guide, what is the minimum number of Unity
servers you must deploy?
A. 1 
B. 2 
C. 3
D. 5 
Answer:A 
23.Your customer has 9,000 users. They request that you configure a voice mail only solution. 
Without planning for the domain controllers and global catalog servers, what is the minimum number of Exchange
TestInside    642-071 servers you need on which to locate the users?
A. 1 
B. 2 
C. 3 
D. 5 
Answer:C 
23.Your customer has a 10,000 user voice mail only deployment. The TDM phone system (not a Cisco
CallManager) that supports all the users is located in the Southern regional office and the telephone system
integration uses a serial connection. 
You have requested space for the Unity servers and they have assigned space in the Northern regional office with
the data servers. The bandwidth they have between the Southern and Northern regional offices is dialup via analog
lines.
Which statement is true?
A. This solution will not work; you must provide T1 level bandwidth to redirect the serial integration data.
B. This solution will work; the phone system and the voice mail system do not need to be in the same location.
C. This solution will not work; you must have the phone system and the voice mail system in the same location.
D. This solution will work; the phone system and the voice mail system can use the analog dialup connection to
communicate with each other.
Answer:C 
24.Your customer requires you to plan a voice mail only solution for 6,000 users. All users are at one physical
location and they all use one phone system. 
Due to the volume of calls this customer receives, you propose two Cisco Unity 72-port systems, each configured
to service half of the users. When a message is left for a specific distribution list, the customer requires that 50
people be simultaneously notified via touch tone pager or cell phone call. The normal call volume generally keeps
half of the ports on both systems busy. 
Without accounting for MWIs, which solution best meets the customer's requirements?
A. configure 25 ports on both systems for out call notification and locate half of the users on each system
B. configure 50 ports on one system for out call notification and locate the users in that distribution list on that
server
TestInside    642-071 C. configure 50 ports on one system for out call notification and locate the users in that distribution list on the
other server
D. This requirement cannot be met. Members in distribution lists must be located on the same Cisco Unity server
to function properly.
Answer:A 
25.Your customer asks you to control the number of Cisco Unity ports that can be used with the Unity Inbox.
They have invested in new speaker and microphone accessories for all Unity Inbox users. They want to eliminate
the use of the Unity ports for Unity Inbox access. 
Which solution meets this requirement?
A. use the Tools Depot Advanced Settings tool, disable the dial out for client apps option
B. using the System Administrators tool, go to the ports section and disable TRaP on all ports
C. using the System Administrators tool, go to the COS section and disable the TRaP option for all Unity Inbox
users
D. use the Tools Depot Advanced Settings tool, go to the System resources choices and disable the Media
Interface Utility systemwide
Answer:B 
26.A sales person creates an estimated Bill of Materials for a customer bid and wants you to verify the accuracy of
the estimate. The customer requirements are voice mail only for 7000 people, with the capability to expand to
8500 people. 
The sales person proposes the following configuration: two 72-port Cisco Unity systems configured as member
servers; three new Exchange message store servers configured as member servers in a new domain; one server
configured as the domain controller and the global catalog controller of the new domain. 
Which statement is true about this configuration? 
A. This configuration will work.
B. This configuration will not work; you need to add one more domain controller for 8,000 users.
C. This configuration will not work; you need to add two more Exchange servers for 8,000 users.
D. The number of servers is correct, but the roles of the Exchange servers must be domain controllers, not
member servers.
Answer:A
TestInside    642-071 27.You have been asked to design a large Automated Attendant Unity solution for a local university that can
process 250 calls simultaneously. The outside callers must be offered a spell by name menu that includes all
faculty and administrative people.
Which configuration best meets the customer's requirements?
A. four 72-port Cisco Unity servers configured in one Active Directory domain and one dialing domain with the
directory handler search scope of each server set to that dialing domain
B. three 72-port Cisco Unity servers configured in one Active Directory domain with one dialing domain with the
directory handler search scope of each server set to that dialing domain
C. four 72-port Cisco Unity servers configured in one Active Directory domain and one dialing domain with the
directory handler search scope of each server set to the global address list
D. three 72-port Cisco Unity servers configured in one Active Directory domain with one dialing domain, with the
primary network location search scope of each server set to the global address list
Answer:A 
28.Your customer asks you to design a Unity voice mail only deployment. The location of all phone equipment
will be on the customer-provided VLAN named "Voice." 
The customer has a separate VLAN for all data servers including the new Exchange servers they have provided
for the message stores that Cisco Unity will use. This VLAN is called Data. The current topology design puts the
Unity servers in the Voice VLAN and the Exchange servers in the Data VLAN. 
Considering best practices, which statement about this configuration is true?
A. The Unity servers should be moved to the same VLAN the Exchange servers are on.
B. The VTL management protocol should be added to assist in crossing between VLANs.
C. Spanning Tree Protocol should be added to the Voice VLAN and a one-way window scope should be set for the
IP addresses of the Exchange servers.
D. Spanning Tree Protocol should be added to both VLANs and a two-way window scope should be set for the IP
addresses of the Unity servers and the Exchange servers.
Answer:A 
29.Your customer requests that you configure a large voice only application with the ability to handle 80 calls
simultaneously. These capabilities must always be available. You must determine the number of servers necessary
to provide the call handling capacity. 
TestInside    642-071 Which configuration best meets the customer's requirements?
A. one 80-port Unity server and one 80-port failover server
B. two servers: one 40-port failover server and one primary 40-port Unity server
C. three servers: two 40-port Unity primary servers and one server to act as the failover server for both primary
servers
D. four servers: two 40-port Unity primary servers and two 40-port failover Unity servers
Answer:D 
30.You are asked to consult on a problem at a large voice mail only remote site. The problem is slow access for
users when they log on to Cisco Unity to retrieve their messages. 
There are four servers at the remote site and 4000 users in a voice mail only application. The servers are all
member servers, two 48-port Unity servers and two Exchange servers with 2000 users each. 
The call traffic at the site is relatively low. There is never a time when all ports are busy on either Unity server.
There are no problems at the headquarters site, which has the same server configuration with the addition of a
domain controller and a global catalog server. 
What should you recommend?
A. The Exchange optimizer application should be run on both message stores.
B. This is an IP windowing issue. The size of the TCPIP window needs to be increased.
C. A global catalog server with name resolution should be added to the remote site for authentication.
D. More fiber optic level bandwidth should be added between the Unity servers and the Exchange servers.
Answer:C 
31.Your customer asks you to create a voice mail only Unity solution for their company of 8,000 users. They have
four geographical locations. They want all users to be in one directory listing and they want outside callers to be
able to locate all users by spelling the name of the user. 
The four locations are referred to as sites A, B, C, andD. Site A is the company's corporate headquarters and is
home to 5,000 users. Site B has 2900 users and site C and D both have 20 users. They have a 5 digit dialing plan
that connects all locations. Sites B, C, and D are each directly connected with Site A with a minimum of T1-level
bandwidth. 
Which solution best meets the customer's requirements?
A. New forest/domain is created at site A and four 72-port Unity servers and four Exchange message stores are
TestInside    642-071 added. This site will be the centralized call processing site.
B. At site A, four 72-port Unity systems are installed and configured as four separate forest/domains. Each Unity
is configured as the DCGC controller and one Exchange server is added to each forest domain. This site will be
the centralized call processing site and service all four sites and 8,000 users.
C. At site A, a new forest/domain is created and three 72-port Unity servers and two Exchange message stores are
added. At site B, a new forest/domain is created, one 72-port Unity server and one Exchange server are added as
the mail store and forest replication connectors are set up. Site C and D users will be located on the equipment at
site A.
D. A new forest/domain is created at site A and three 72-port Unity servers and two Exchange message stores are
added. At site B, one 72-port Unity server and one Exchange server are added as the mail store and one server is
added as a local Domain controller and global catalog server. Site C and D users will be located on the equipment
at site A.
Answer:D 
32.Your customer asks you to design a voice mail only Unity solution for their company of 8,000 people. They
have four geographical locations and want all the users to be in one directory listing. They want outside callers to
be able to locate all users from either location A or B by spelling the name of the user. They are using a
UNIX-based e-mail platform.
The four locations are referred to as sites A, B, C, andD. Site A is the company's corporate headquarters and is
home to 5,000 users. Site B has 2900 users and sites C and D both have 20 users. 
They have a 5 digit dialing plan that connects sites A and B, but sites C and D are on separate phone and VPIM
compliant voice mail systems. There is a minimum of T1 level bandwidth between sites A andB. Sites C and D are
connected through PSTN with Internet access through local gateways at the sites. 
Which four actions need to be taken to meet the customer's directory requirements? (Choose four.)
A. configure VPIM on Unity
B. install one Unity server in each site
C. configure Unity with the UNIX link software
D. configure VPIM subscribers on a Unity at Site A
E. configure VPIM subscribers on a Unity at Site D
F. create one dialing domain and add all Unity servers to it
G. set the search scope on each Unity to search the dialing domain
TestInside    642-071 H. create four dialing domains and add one Unity to each dialing domain
Answer:ADFG 
33.Your customer asks you to design a Cisco Unity voice mail only solution to allow all outside callers at any of
the 14 different company offices to locate any of the 7,500 users by simply spelling the name of the user via the
touch tone telephone keypad in an Automated Attendant conversation. 
Each office has a different voice mail system that you will be replacing with the new Unity solution. Each office
also has a separate phone system. The phone systems come from various manufacturers. 
Users dial a 10 digit phone number for each user to reach them. There is no telephone system networking between
offices. Many of the phone systems will not allow conferencing and have a limited number of trunks for each
office. The customer is not willing to change out the phone system structure at this time. 
Which solution best meets the customer's requirements?
A. This can be done with Voice Processing Internet Management (VPIM), which is an industry standard that
allows different phone systems to integrate over the Internet. 
B. This can easily be done with the optional Cisco Unity PBX conference feature that allows transfers between
different PBX's by using the Intel Dialog Voice Cards installed in all Unity servers.
C. You explain to the customer that you can network the Unity systems together for subscriber to subscriber
messaging, but to fulfill the requirements they want for Automated Attendant transfers between offices they need
to change to a networked phone system solution.
D. A new forest/domain is created and one Unity system is added at each office. All Unity systems are member
servers in the forest/domain and are provisioned for the number of users at that site. On one Unity server, a dialing
domain is created and all other Unity servers join that dialing domain. The directory handler search scope is set to
that dialing domain.
Answer:C 
34.Your customer asks you to design a voice mail only Unity solution for their company of 4,000 people. They
have four physical locations and the users are spread evenly across the four locations. 
They have a custom built e-mail system that runs on UNIX. There is T3-level bandwidth in a mesh topology
between the four locations. They have a fully networked phone system with a 5 digit dialing plan throughout all
locations. 
They want all the users to be in one directory listing. They also want outside callers to be able to navigate through
TestInside    642-071 the Automated Attendant menu to a list of specific users based on location and department. 
You are creating a new forest. At each location, there will be one DCGC, one Unity server, and one Exchange
server.
What are three recommended ways to best meet the customer's directory requirements? (Choose three.)
A. install Unity on all servers
B. do not run forest prep on any of the servers
C. install Exchange 5.5 on the appropriate new servers
D. install Exchange 2000 on the appropriate new servers
E. create distribution lists for all the necessary departments on all Unity servers
F. create distribution lists for all the necessary departments on one Unity server
G. as Windows 2000 is installed at the three remaining locations, join the newly created forest 
Answer:DFG 
35.Your customer asks you to design a voice mail only Unity solution for their company of 10,000 people. They
want all 10,000 users to be in one directory listing. 
They have four geographical locations and two Active Directory forests. The four locations are referred to as sites
A, B, C, andD. The two forests are known as A&B.com and D&C.com. 
Which solution meets the customer's requirements?
A. remove one of the forests; add all the servers from the removed forest to the remaining one; deploy Cisco
Unity digital networking
B. deploy Cisco Unity digital networking; set the SQL database on each Unity server to replication mode; set the
search scopes of each Unity server to the replicated SQL directory
C. set up forest directory replication connectors between A&B.com and C&D.com; deploy Cisco Unity digital
networking; set the search scopes of each Unity server at the combined global address list
D. deploy Cisco Unity digital networking in both forests; use Active Directory Management Information
Synchronization (AMIS) to combine the two forests directories; set the search scopes of each Unity server to the
new "combined" global address list
Answer:A 
36.Your customer asks you to plan a large Unified Messaging Cisco Unity solution for their 22,000 users. They
are currently upgrading all of the sites into one forest with Exchange 2003 as the standard for all e-mail servers.
TestInside    642-071 They will complete the upgrade in three years, so they want a temporary voice mail only solution with a clean
migration path. 
Following best practices, how can you accomplish this?
A. create a separate forest/domain with new servers provisioned for the 22,000 users and use the same Exchange
alias naming convention
B. create a separate forest/domain with new servers provisioned for the 22,000 users and use a separate Exchange
alias naming convention so there are no overlapping GUID issues
C. join the forest/domain; add new servers provisioned for the 22,000 users; use the same Exchange alias naming
convention so users can be changed as they are upgraded
D. join the forest/domain; add new Unity servers provisioned for the 22,000 users; use the existing mail store and
user alias; control which users get Unified Messaging via the COS of the users as they are upgraded
Answer:A 
37.ou are planning to deploy a voice mail only solution with a migration path to Unified Messaging. You are
establishing Cisco Unity in your own forest/domain.
What is the Cisco Unity Design Guide recommended exchange alias naming convention?
A. Lastname.Firstname
B. Firstname.Lastname
C. match what already exists or is planned
D. anything except what already exists or is planned
Answer:C 
38.Your customer asks you to design a large Unified Messaging Cisco Unity solution for their 8,000 users. They
are currently upgrading all of the sites into one Domino Domain with Lotus Domino as the standard for all e-mail
servers. 
They will complete the upgrade in approximately ten months. They want a temporary voice mail only solution
with a clean migration path to Unified Messaging. 
How can you accomplish this?
A. add new Unity and Exchange servers provisioned for the 8,000 users as part of the Domino domain; enable the
IBM to MS directory conversion tools
B. create a separate forest/domain with new Unity and Domino servers provisioned for the 8,000 users; use the
TestInside    642-071 user conversion wizard to add the new users.
C. add new Unity and Domino servers provisioned for the 8,000 users as part of the Domino domain with voice
mail only licenses; upgrade the licenses as the users are added to the Domino domain
D. create a separate forest/domain with new Unity and Exchange and Active Directory servers provisioned for the
8,000 users; when the new Domino domain upgrade is complete, reinstall all Unity servers into the Domino
domain
Answer:D 
39.Your customer asks you to design a Unified Messaging solution for 20,000 users. They need voice mail now,
but will not have the Exchange server infrastructure in place for at least 10 months. 
They have Active Directory and global catalog infrastructure set up. They want you to add your own Exchange
servers in a new Active Directory forest. However, they want to use the directory controllers global catalog
servers from their current deployment. 
How can you accomplish this?
A. This cannot be done.
B. use Microsoft Forest Manager to allow the current DCGC to service the new forest Exchange servers
C. install the new forest in mixed mode; place one NT PDC in both forests; set up a trust relationship between the
two PDC servers to allow for user management
D. configure the servers the way the customer has requested; use Microsoft Server Merger to temporarily place
the Exchange servers from the new forest under the control of the current forest
Answer:A 
40.Your customer asks you to plan a voice mail only solution that works with their current network topology.
They have 14,000 users on a UNIX-based e-mail platform. 
All data servers, including the new Exchange mail stores you will be installing, are behind the company firewall.
They want to place the Unity servers in the phone room with the TDM telephone system where there is no
network access behind the firewall.
Which solution best meets the customer's requirements?
A. do as requested, separate the mail store servers from the Unity servers 
B. have them supply access behind the firewall to the phone room for all the Unity servers
C. place the voice mail system on a separate VLAN with the TDM communications equipment
TestInside    642-071 D. have them supply behind the firewall connections to the phone room for one of the Unity servers and set that
Unity server up as the firewall bridgehead for the rest of the Unity servers
Answer:B 
41.Your customer asks you to design a voice mail only solution that works with the current network topology.
They have 14,000 users on a UNIX-based e-mail platform. 
All data servers, including the new Active Directory domain controllers you will be installing, are behind the
company firewall. They want to place the Unity servers in the phone room with the TDM telephone system where
there is no network access from behind the firewall.
Which statement is true?
A. This will not create any problems.
B. The Active Directory servers can be separated from the Unity servers.
C. You should have them supply access to the network from behind the firewall to the phone room for all the
Unity servers.
D. You should have them supply access to the network from behind the firewall to the phone room for one of the
Unity servers and set up that Unity server as the firewall bridgehead for the rest of the Unity servers.
Answer:C 
42.Your customer asks you to design a voice mail only solution that works with the current network topology.
They have 11,000 users on an existing UNIX e-mail platform. 
All data servers, including the new global catalog servers you will be installing, are behind the company firewall.
They want to place the Unity servers in the public, unprotected area where there is no access to the DCGC or the
Exchange servers.
Which statement is true?
A. You need to have them supply access behind the firewall to the Unity servers.
B. The global catalog servers can be separated from the Unity servers, but you must have the Microsoft firewall
tunneling software enabled on the DCGC and the Unity servers.
C. You should have them supply access behind the firewall to a single Unity server and set that Unity server up as
the firewall bridgehead for the rest of the Unity servers.
D. This will not create any problems. In a voice mail only deployment it is not important to place the Unity
servers behind the firewall with the DCGC and Exchange servers.
TestInside    642-071
Answer:A 
43.Your customer asks you to consult on a plan for their Cisco Unity voice mail only solution for 9,000 users at
three sites. Each site has 3,000 users. All three sites are in the same physical location. 
The customer has configured the "sites" for organization and security. Sites A and B are both protected by a
firewall and site C has no firewall protection. The customer wants the Unity servers installed in each of the sites,
but wants the Exchange message stores behind the firewalls. 
Which statement is true?
A. You should have the customer create a firewall for site C and add the Unity server, global catalog server, and
the mail store behind the firewall for that site.
B. This will work as long as the firewall is "Exchange aware." The firewall will protect the mail stores and still
allow access to the Unity system.
C. This will work as long as the Unity system accounts have the correct rights and permissions configured, as
defined in the Firewall for Unity White Paper.
D. For security, you should place all Unity servers and message store servers behind the firewall set up for sites A
andB. For authentication you should make sure the global catalog for site C is not behind the firewall.
Answer:A 
44.Which type of Cisco Unity deployment is shown in the exhibit? 
A. localized call processing, branched messaging
B. centralized call processing, localized messaging 
C. distributed call processing, distributed messaging
D. centralized call processing, centralized messaging
TestInside    642-071
Answer:D 
45.Which Cisco Unity type of deployment model is shown in the exhibit? 
A. centralized call processing, distributed messaging
B. centralized call processing, centralized messaging
C. distributed call processing, decentralized messaging
D. localized call processing, localized branch messaging
Answer:A 
46.Which type of Cisco Unity deployment model is shown in the exhibit? 
A. The exhibit does not show a valid model combination.
B. centralized call processing, distributed messaging
C. distributed call processing, decentralized messaging
D. localized call processing, localized branch messaging
TestInside    642-071
Answer:A 
47.In the exhibit, Cisco Unity is integrating with a PBX using SMDI integration.  
Which deployment does the diagram in the exhibit represent?
A. centralized call processing
B. decentralized call processing
C. localized branch call processing
D. It is not a supported deployment.
Answer:A 
48.Which Cisco Unity messaging model is shown in the exhibit? 
A. branched messaging 
B. clustered messaging 
C. centralized messaging 
D. distributed messaging 
Answer:C
TestInside    642-071 49.Which messaging deployment model is shown in the exhibit? 
A. branched messaging
B. distributed messaging
C. exchange clustered messaging 
D. This is not a supported message deployment model.
Answer:D 
50.Your customer's messaging topology is shown in the exhibit.  
Which Cisco Unity messaging deployment model is illustrated?
A. branched messaging
B. single site messaging
C. distributed messaging
D. centralized messaging
Answer:C 
51.Why is the Cisco Unity deployment shown in the exhibit NOT supported? 
  642-071 
A. Digital networking will not work over the WAN. 
B. There are two Cisco Unity servers installed at headquarters.
C. A Cisco CallManager cluster is required at the branch office. 
D. The Cisco Unity branch office server is remote from a message store.
Answer:D 
52.CallManager Cluster A and Unity use extension range 1000-1650. CallManager Cluster B and Unity use
extension range 2000-2450. CallManager Cluster C and Unity use extension range 1500-1950. 
Your customer wants to deploy Unified Messaging. Exchange stores are local at each site and part of the same
organization. Digital networking is an absolute requirement without using access codes.  
Which statement is true?
A. All Unity servers are in different locations, but are part of the same dialing domain.
B. A unique dialing domain is created per Unity location. The other Unity locations are automatically available at 
  642-071
that time.
C. All Unity servers are in the same dialing domain and CallManager Cluster C needs to change the extensions
that overlap with CallManager Cluster A.
D. Unity servers A and B are in the same dialing domain and Unity C is put into its own dialing domain to address
the extension conflicts with Unity A and B.
Answer:C